Take 30% Off All Dyes For A Limited Time

These professional quality anodizing dyes provide consistent, quality results. The same dyes are sold to professional anodizing shops all over the world. Each 4oz bottle of dye concentrate makes 2 Gallons.

These colors are approximate. The finish will normally have a more 'metallic' look, and will vary slightly depending on the alloy and surface preparation.

Procedure for Obtaining Dyed Anodize

Anodize the aluminum at 60-75°F for 90 minutes at 4.5 amps per sq foot or 0.03 amps per sq inch. Use our Anodizing Kit.

After thorough rinsing, immerse the part in the dye at a temperature of 140°F for 15 minutes.

Finally, seal by hanging the part in a sealer bath for 15 minutes.

Note: All dyes are suitable for high temp and low temp sealants, except Grey BL and Yellow 4A, which should not be sealed using LT Sealer.

Teal	Violet 3D	Yellow 4A	Blue 4A
Black HBL	Brown BL	Green SCG	Yellow 3GL
Grey NLN	Violet DS	Red Bordeaux 2R	Gold S
Golden Orange	Flourescent Pink	Green AEN	Electric Blue
Turquoise	Copper BF	Flourescent Yellow	Bronze
Grey BL	Brown GL	Deep Red	Olive Drab
Fast Blue	Orange 3A

Please note: We are beginning to ship some dyes in powder form, instead of paste. You may receive 2oz of powder instead of 4oz of paste. Both amounts still make up 2 Gal of dye. Thank you.