ADF – Angle Driver with Integrated Failsafe
The ADF combines an advanced solid state pitch stabilizer with a two-stage failsafe all in one space-saving package. Measuring only 1¼" x 7/8" x 3/16", you'll find the precision and features of much larger devices tailor-made to fit in today's small-diameter water tight cylinders.
Open up the WTC or Sub-driver and set the motor bulkhead assembly on a level table.
Install the ADF and adjust the "pitch" trim pot until the "Zero Bubble" LED (green) comes on. From then on when the boat sits on an even keel the ADF tells you so...
Read The Instructions - 38kb PDF
Features:
- Solid State Pitch Stabilizer
- With 10-bit precision and DSP technology the ADF's pitch stabilizer is the smoothest in the business. Designed with ease of setup in mind, the ADF offers two sensitivity settings, trim-pot neutral adjustment and a built-in zero-bubble indicator. The ADF's pitch stabilizer also supports stand-alone operation, permitting bowplane control on channel-limited radios.
- Two stage Fail Safe
- Upon signal loss the ADF immediately issues a "neutral" command on the ballast channel to prevent taking on any more ballast. If the receiver signal is not recovered after three seconds the ballast channel is driven to the user-defined fail-safe position, blowing your ballast tank dry. The ADF also features an indicator LED to show when the failsafe has been activated.
|
